1/2 In. X 250 Ft. 1-GPH Pressure Compensating Emitter Tubing With 18 In. Spacing
- Assembled Depth (in.): 23 in
- Assembled Height (in.): 6 in
- Assembled Width (in.): 23 in
- Inner Diameter (in.): .50
- Outer Diameter (in.): .50
- Tubing Length (ft.): 250
- Color Family: Browns / Tans
- Drip Line/Tubing Type: Drip or Emitter Line Tubing
- Irrigation System Component: Tubing
- Pressure Rating: 10-50 PSI; recommended operating pressure: 25 PSI
- : 5 year
DIG’s Earthline Brown PC, 250 ft. 1 GPH dripline is a pressure compensating dripline with drip emitters spaced every 18 In. delivering equal flow over the length of dripline. Use for all plantings, including groundcover, shrubs or individual plants, loop around trees, or for complete coverage of an area where multiple lines of dripline are placed 16” to 24” apart. Each PC drip emitter inside the dripline consists of a cylinder with a labyrinthine water passage, filter and diaphragm. Each PC drip emitter continuously adjusts to varying incoming water pressure, ensuring a constant flow rate along the dripline.
- Can be covered with mulch and used below or above the ground
- DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
- Use with DIG black insert, 0.700 compression fittings, brown barbed fittings and nut lock fittings
- Maximum run length of 369 ft. can be achieved from a single water source at 45 PSI
- Dripline dimension is 0.600 I.D. x 0.700 O.D.
- Use for groundcover, roses, shrubs, plantings in narrow areas, vegetable gardens or loop around trees
- Each emitter continuously adjusts to varying incoming water pressures ranging from 10 to 45 PSI, ensuring a constant flow rate regardless of elevation along the dripline
- Manufactured with dow’s 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
- Total of 65 1-GPH PC drip emitters per 100 ft.
- Drip line produces a flow rate of 1 GPH per each drip emitter at 10 PSI to 45 PSI
- Flow-regulated, self-flushing in-line emitters deliver equal flow over a wide pressure range and over the length of the drip line